Right-click the link below and select 'Save Link As' or 'Save Target As' to save the catalogue to your computer.
Model: EL3-14 Passenger Specifications
Click here to view the 14 Passenger Well Plan
| Specification | |
|---|---|
| Type of Lift | Electrohydraulic Passenger Lift complying with AS 1735 Part 3 |
| Travel | Two to four floors, maximum 12m |
| Speed | 0.5 to 0.75m/s |
| Duty Load |
14 passenger - 952kg |
| Car Dimensions |
1450mm wide (minimum of 1400 after finishes) 1700mm deep 2300mm internal height |
| Car Finishes |
Standard laminate Floor covering by others |
|
Door System |
Power doors VF control Full light ray protective device One hour fire rating (FRL) |
| Door Sizes |
Clear door width 900mm Clear door height 2100mm |
| Door Finishes |
Stainless steel linished panels Stainless steel narrow frames |
| Control System |
Microprocessor system Fire service control on all lifts as required by BCA |
| Hydraulic System |
Twin ram unit (single stage or telescopic depending on travel) Oil immersed pump/motor, Blain EV100 control valve |
| Shaft Size |
Width 2000mm X Depth 2025mm for single entrance car Width 2000mm X Depth 2150mm for thru entrance car |
| Pit Depth | Minimum pit depth depends on travel and ram selection but not less than 1200mm and maximum 1800mm unless a false floor is fitted. The lift pit must go to solid earth and not be over any occupiable space or passage. |
| Top Clearance | Distance required to the top of shaft (inside) or under side of lifting beam 3600mm standard |
