Model: EL3T
This unit is a full commercial lift package housed within it's own self supporting galvanised steel tower, there is no requirement for a structural shaft or even a structural wall. It can be used for public or private applications.
The primary difference between this lift & our EL16T is the car speed (0.60 metres per second as opposed to the EL16T maximum allowable speed of 0.30 metres per second).
There are also mandatory requirements relating to Pit Depth (1000mm minimum) & Top Clearance/head room above the upper landing (3500mm minimum) to allow for the increased speed.
This lift can also be manufactured to comply with BCA E3.6 & AS1735 Pt 12 Facilities for People with Disabilities.
The lift is fitted with stainless steel elevator doors & has a car interior colour range comprising 19 standard colours.
Click here to view the EL16T & EL3T PB Single Entry Tower Well Plan
Click here to view the EL16T & EL3T Through Tower Entry Well Plan
| Specification | |
|---|---|
| Drive Type | Twin Ram Direct Hydraulic Drive |
| Power Requirements | 415 volts three phase |
| Control System | Microprocessor - Automatic (Key Lockable) |
| Rated Capacity |
612kgs |
| Travel (maximum) | 10,000mm |
| Rated Speed | Up to 0.6 m/s max |
|
Car Floor Dimensions |
1100 x 1400mm |
| Car Interior |
Fire rated 18mm thick Lamipanel Timber Floor Covering -by others Lighting - low voltage halogen downlights |
| Emergency Facilities |
Telephone, alarm & car lighting 24VDC battery backup |
| Tower Dimensions |
Single Entry - 1730W x 1800D Through Entry - 1730W x 1970D |
| Min' Void Requirements |
Single Entry - 1770W x 1840D Through Entry - 1770W x 2010D |
| Pit Depth | 1000mm Minimum (Determined by travel & top clearance available - consult Prestige) |
| Top Clearance | 3500mm Minimum (Aust Standard & Determined by travel & pit depth available - consult Prestige) |
| Landing Doors | Automatic Stainless Steel Centre Opening |
| Car Doors | Automatic Stainless Steel Centre Opening |


